Step 1
Unplug the Clipper. Remove the screws from your clipper name plate. Put them in a safe place. |
Step 2
Once the screws have been extracted, remove only the plastic name plate cover from your clippers. |
Step 3
In its place, lie down and line up the black plastic plate provided in your attachment parts kit with the screw holes. |
Step 4
Place the Clipper Vac® head provided in your parts kit on top of the plastic plate. Use the screws in the kit that are the closet match to the screws you previously removed from your clipper to begin securing the head in place. |
Step 5
Be sure that you do not over-tighten the screws! Doing so could damage your clippers internally. To remove the Clipper Vac® head, reverse steps five through one. |
Let us know how this installation procedure
worked for you! |
